Questions? Email Us or Call: (985) 868-2253

This product doesn't have a photo yet.

WORLD-BEAM OPPOSED MODE RECEIVER

WORLD-BEAM OPPOSED MODE RECEIVER

Banner Engineering

Description:

WORLD-BEAM Opposed Mode Receiver,10 - 30 VDC,Less Than 25 MILAMP,Sensing Range: 20 MR,940 NMTR Infrared LED Sensing Beam,Output: PNP, 100 MILAMP, ON-State Saturation Voltage: Less Than 1 V At 10 MILAMP And Less Than 1.5 V At 100 MILAMP,Acrylic Lens,IEC IP

Special Features:

Rectangular with M18 barrel housing style; Easily fits (or retrofits) almost any mounting situation; Exceptional optical performance, comparable to larger MINI-style or barrel sensors; Bright LED operating status indicators are visible from 360 DEG; Rugged sealed housing, protected circuitry; Less than 1 millisecond output response for excellent sensing repeatability; Protected against false pulse on power-up and continuous overload or short circuit of outputs

Application:

For Use With QS18 Series Photoelectric Sensor Emitter

Add This to Your Cart

Name Part number UPC Ambient light Amperage rating Application Connection Enclosure Environmental conditions Leakage current Lens Mounting Operating temperature Output Response time Sensing beam Sensing range Size Special features Standard Type Voltage rating
STB SERIES OPTICAL TOUCH BUTTON STBVP6 662488641795 100000 75 For Use With DUO-TOUCH SG AT-FM-10K, AT-GM/HM-13A, AT-GM/HM-11KM Two-Hand Control Modules And SC22-3 Safety Controller 4-Wire 2 MR Integral Cable Non-Metallic, Polyetherimide Upper Housing, Fiber-Reinforced PBT Polyester Base, Polypropylene (TP) Field Cover 90 PCT At 50 DEG C Relative Humidity, The Polyetherimide Upper Housing Will Become Brittle With Prolonged Exposure To Outdoor Sunlight. Window Glass Effectively Filters Longer Wavelength Ultraviolet Light And Provides Excellent Protection From Sunlight. Avoid Contact With Strong Alkalis, Hydrocarbons And Fuels Off-State Output: Less Than 1 MICAMP - 30 MM Threaded Base 0 - 50 Complementary PNP, 150 MILAMP, On-State Maximum Output Voltage (No Load): 1.5 V 20 Infrared - 60 MM Length X 43.2 MM Width X 59.1 MM Height Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the "touch area" (yoke) of the switch, interrupting the button’s infrared sensing beam; When the STBVP6 is used with Banner’s SC22-3 Safety Controller in a two-hand control system, the power supply to the STBVP6 must be of the same voltage that is used to power the Safety controller and they must have a common supply ground; Protected against transient voltages, reverse polarity and against false pulse on power-up, model C/US UL Listed, CE, Analysis Of Measures For Fault Avoidance And Fault Control According To SIL3 (IEC 61508 and IEC 62061) And Category 4 (EN ISO 13849-1) Passes EMI/RFI Test Levels As Specified In IEC61496 And IEC62061 STB Series Self-Checking Optical Touch Button With Yellow Field Cover 10 - 30
STB SERIES OPTICAL TOUCH BUTTON STBVP6Q5 662488641818 100000 75 For Use With DUO-TOUCH SG AT-FM-10K, AT-GM/HM-13A, AT-GM/HM-11KM Two-Hand Control Modules And SC22-3 Safety Controller 4-Pin Euro-style Quick Disconnect Non-Metallic, Polyetherimide Upper Housing, Fiber-Reinforced PBT Polyester Base, Polypropylene (TP) Field Cover 90 PCT At 50 DEG C Relative Humidity, The Polyetherimide Upper Housing Will Become Brittle With Prolonged Exposure To Outdoor Sunlight. Window Glass Effectively Filters Longer Wavelength Ultraviolet Light And Provides Excellent Protection From Sunlight. Avoid Contact With Strong Alkalis, Hydrocarbons And Fuels Off-State Output: Less Than 1 MICAMP - 30 MM Threaded Base 0 - 50 Complementary PNP, 150 MILAMP, On-State Maximum Output Voltage (No Load): 1.5 V 20 Infrared - 60 MM Length X 43.2 MM Width X 75.4 MM Height Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the "touch area" (yoke) of the switch, interrupting the button’s infrared sensing beam; Protected against transient voltages, reverse polarity and against false pulse on power-up, models with solid-state outputs have overload and short-circuit protection C/US UL Listed, CE, Analysis Of Measures For Fault Avoidance And Fault Control According To SIL3 (IEC 61508 and IEC 62061) And Category 4 (EN ISO 13849-1) Passes EMI/RFI Test Levels As Specified In IEC61496 And IEC62061 STB Series Self-Checking Optical Touch Button With Yellow Field Cover 10 - 30
STB SERIES OPTICAL TOUCH BUTTON STBVR81 662488641900 100000 75 For Use With DUO-TOUCH SG AT-FM-10K, AT-GM/HM-13A, AT-GM/HM-11KM Two-Hand Control Modules And SC22-3 Safety Controller 5-Wire 2 MR Integral Cable Non-Metallic, Polyetherimide Upper Housing, Fiber-Reinforced PBT Polyester Base, Polypropylene (TP) Field Cover 90 PCT At 50 DEG C Relative Humidity, The Polyetherimide Upper Housing Will Become Brittle With Prolonged Exposure To Outdoor Sunlight. Window Glass Effectively Filters Longer Wavelength Ultraviolet Light And Provides Excellent Protection From Sunlight. Avoid Contact With Strong Alkalis, Hydrocarbons And Fuels - - 30 MM Threaded Base 0 - 50 2 Individual Complementary Electromechanical Relays, Maximum Switching Voltage: 125 VDC/150 VAC, Maximum Switching Current: 1 A At 24 VDC And 0.4 A at 125 VAC (Resistive Loads), Maximum Resistive Power: 24 WTT DC/50 VA AC 20 Infrared - 60 MM Length X 43.2 MM Width X 59.1 MM Height Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the "touch area" (yoke) of the switch, interrupting the button’s infrared sensing beam; Protected against transient voltages, reverse polarity and against false pulse on power-up, models with solid-state outputs have overload and short-circuit protection C/US UL Listed, CE, Analysis Of Measures For Fault Avoidance And Fault Control According To SIL3 (IEC 61508 and IEC 62061) And Category 4 (EN ISO 13849-1) Passes EMI/RFI Test Levels As Specified In IEC61496 And IEC62061 STB Series Self-Checking Optical Touch Button With Yellow Field Cover 20 - 30
STB SERIES OPTICAL TOUCH BUTTON STBVR81Q 662488641917 100000 75 For Use With DUO-TOUCH SG AT-FM-10K, AT-GM/HM-13A, AT-GM/HM-11KM Two-Hand Control Modules And SC22-3 Safety Controller 5-Pin Mini-style Quick Disconnect Non-Metallic, Polyetherimide Upper Housing, Fiber-Reinforced PBT Polyester Base, Polypropylene (TP) Field Cover 90 PCT At 50 DEG C Relative Humidity, The Polyetherimide Upper Housing Will Become Brittle With Prolonged Exposure To Outdoor Sunlight. Window Glass Effectively Filters Longer Wavelength Ultraviolet Light And Provides Excellent Protection From Sunlight. Avoid Contact With Strong Alkalis, Hydrocarbons And Fuels - - 30 MM Threaded Base 0 - 50 2 Individual Complementary Electromechanical Relays, Maximum Switching Voltage: 125 VDC/150 VAC, Maximum Switching Current: 1 A At 24 VDC And 0.4 A at 125 VAC (Resistive Loads), Maximum Resistive Power: 24 WTT DC/50 VA AC 20 Infrared - 60 MM Length X 43.2 MM Width X 74.2 MM Height Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the "touch area" (yoke) of the switch, interrupting the button’s infrared sensing beam; Protected against transient voltages, reverse polarity and against false pulse on power-up, models with solid-state outputs have overload and short-circuit protection C/US UL Listed, CE, Analysis Of Measures For Fault Avoidance And Fault Control According To SIL3 (IEC 61508 and IEC 62061) And Category 4 (EN ISO 13849-1) Passes EMI/RFI Test Levels As Specified In IEC61496 And IEC62061 STB Series Self-Checking Optical Touch Button With Yellow Field Cover 20 - 30
WORLD-BEAM OPPOSED MODE EMITTER QS186EQ5 662488645823 - 25m For Use With QS18 Series Photoelectric Sensor Receiver 6 IN Pigtail With 4-Pin Euro-Style Quick Disconnect IEC IP67 NEMA 6 Thermoplastic ABS 95 PCT At 50 DEG C Relative Humidity - Acrylic - -20 To 70 - - 940 NMTR Infrared LED 20 15 MM Length X 31.1 MM Width X 34.5 MM Height, 18 MM Barrel Diameter Rectangular with M18 barrel housing style; Easily fits (or retrofits) almost any mounting situation; Exceptional optical performance, comparable to larger MINI-style or barrel sensors; Bright LED operating status indicators are visible from 360 DEG; Rugged sealed housing, protected circuitry; Less than 1 millisecond output response for excellent sensing repeatability; Protected against false pulse on power-up and continuous overload or short circuit of outputs C/US RU Listed, CE Opposed Mode Emitter 10 - 30
WORLD-BEAM OPPOSED MODE RECEIVER QS18VP6RQ5 662488645847 - 25m For Use With QS18 Series Photoelectric Sensor Emitter 6 IN Pigtail With 4-Pin Euro-Style Quick Disconnect IEC IP67 NEMA 6 Thermoplastic ABS 95 PCT At 50 DEG C Relative Humidity Off-State Output: Less Than 50 MICAMP Acrylic - -20 To 70 PNP, 100 MILAMP, ON-State Saturation Voltage: Less Than 1 V At 10 MILAMP And Less Than 1.5 V At 100 MILAMP 750 MICSEC On/375 MICSEC Off 940 NMTR Infrared LED 20 15 MM Length X 31.1 MM Width X 34.5 MM Height, 18 MM Barrel Diameter Rectangular with M18 barrel housing style; Easily fits (or retrofits) almost any mounting situation; Exceptional optical performance, comparable to larger MINI-style or barrel sensors; Bright LED operating status indicators are visible from 360 DEG; Rugged sealed housing, protected circuitry; Less than 1 millisecond output response for excellent sensing repeatability; Protected against false pulse on power-up and continuous overload or short circuit of outputs C/US RU Listed, CE Opposed Mode Receiver 10 - 30
WORLD-BEAM QS18 PHOTOELECTRIC SENSOR QS18VP6LVQ5 662488645861 - 25m - 6 IN Pigtail With 4-Pin Euro-Style Quick Disconnect IEC IP67 NEMA 6 Thermoplastic ABS 95 PCT At 50 DEG C Relative Humidity Off-State Output: Less Than 50 MICAMP Acrylic - -20 To 70 PNP, 100 MILAMP, ON-State Saturation Voltage: Less Than 1 V At 10 MILAMP And Less Than 1.5 V At 100 MILAMP 600 660 NMTR Visible Red LED 6.5 15 MM Length X 31.1 MM Width X 34.5 MM Height, 18 MM Barrel Diameter Rectangular with M18 barrel housing style; Easily fits (or retrofits) almost any mounting situation; Exceptional optical performance, comparable to larger MINI-style or barrel sensors; Bright LED operating status indicators are visible from 360 DEG; Rugged sealed housing, protected circuitry; Less than 1 millisecond output response for excellent sensing repeatability; Protected against false pulse on power-up and continuous overload or short circuit of outputs C/US RU Listed, CE QS18 Series Self-Contained Non-Polarized Retroreflective Mode Miniature Photoelectric Sensor 10 - 30
R55F SERIES COLOR MARK SENSOR R55FQ 662488646349 - 70m - 5-Pin Euro-Style Quick Disconnect IEC IP67 NEMA 6 Black ABS/Polycarbonate Blend Relative Humidity: 90 PCT at 50 DEG C Off-State Output: Less Than 5 MICAMP - 35 MM DIN Rail -10 To 55 Bipolar (NPN And PNP), 150 MILAMP Maximum at 25 DEG C; ON-State Saturation Voltage: PNP - Less Than 1 V at 10 MILAMP And 1.5 V at 150 MILAMP, NPN - Less Than 200 MILV at 10 MILAMP And 1 V at 150 MILAMP 50 880 NMTR Infrared 0.125 IN Diameter Bundle: 140 MM For Black-to-White Contrast 30 MM Length X 25 IN Width X 97 IN Height Randomly mixed bifurcated fiber bundles produce the best optics for color mark sensing; Bundle of small fibers may be shaped at sensing end tip to match the color mark shape; Best chemical resistance; Protected against reverse polarity and transient voltages; Protected against false pulse on power-up and continuous overload or short-circuit of outputs; Outstanding color contrast sensitivity; detects 16 levels of gray scale; Non-volatile memory; Fibers install quickly without tools; 1 stainless steel right angle bracket and 1 PBT polyester bracket for mounting to flat surfaces also included with sensor; Glass fiber models function well in harsh environments typically associated with printing processes; Nylon fiber clip - R55F Series Glass Fiber Optic Color Mark Sensor 10 - 30